Shenzhen Weite Times Technology Co., Ltd. Blogs

App Home Screen—Tap [Settings] in the bottom-right corner of the device—[Monitoring Features]—[Motion Detection] If the Motion Detection toggle is off, simply tap it to turn it on; if the options are “Human Detection" or “Motion Detection," select the one that best suits your needs. Function ...

Once the camera is added to the mobile app, motion detection is enabled by default, and you will receive alert notifications. If you do not want to receive alert notifications, go to the “Devices” page on the app's home screen and tap the “Do Not Disturb” button to enable Do Not Disturb mode. Simply ...

When motion detection is enabled, alarm notifications can be sent via email. To set up email notifications, follow these steps: On the Settings page, select Notification Settings. Once you’re on the Notification Settings page, enable email notifications in the Notification Methods section, then add ...

When you don’t need alarms to be triggered across the entire monitoring area, but only want to detect alarms in specific sections of the monitoring area, you can mask out the areas you want to exclude by drawing detection zones. Here’s how to set it up: Open the O - KAM Pro app, go to the device’s ...

Troubleshooting for Solar Low-Power Cameras Issue: Camera fails to trigger motion alerts or record videos normally Please follow these adjustment suggestions one by one: 1.Optimize installation angle (if feasible) Mount the camera diagonally to face pedestrian movement paths, matching the device’s ...

Check the camera’s 4G signal strength and ensure it is at least 3 bars or higher; Check for signal interference in the camera’s location and try moving the device to an area with a stronger 4G signal; Try changing the video resolution; if your resolution is set to “Ultra HD," we recommend switching ...

Check if the camera's SIM card has sufficient 4G data. Check for signal interference in the camera's location. Check the signal strength indicated by the signal bars on the app's home screen. If the signal is below 3 bars, you will most likely be unable to view the video. Try moving your device to ...

First, ensure the camera is properly powered and restart it. 4G Camera: Check if the camera’s SIM card has sufficient 4G data and ensure the camera is connected to the internet. Confirm whether the camera has recognized the QR code generated by the mobile app; listen for the camera’s voice prompt—if ...

If playback works normally when the recording settings are set to “24/7 Recording” or “Manual Recording,” but no new recordings are available for playback after switching to “Motion Detection Recording,” please follow these troubleshooting steps: Are all motion detection alerts enabled in the app? ...